IBM 6500 manual Interfaces, 10/100Base-T, Run and Auto Reset Modes

Chapter 1 Interfaces

Interfaces

The Ethernet interfaces with your printer through an Ethernet™ 10/100Base-T interface connector.

10/100Base-T

ADAPTER The Ethernet Interface at the rear of the printer for the 10/100Base- T interface has two indicator lights and two DIP switches, as shown in Figure 2.

DIP Switches

1

2

STAT (System Status)

NET (Data to Network)

Figure 2. Status Indicator Lights and DIP Switches

Run and Auto Reset Modes

Run mode is the normal operating state of the Ethernet Interface. Auto Reset mode is entered when the watchdog timer is triggered and the Print Server resets itself. In either mode, the STAT LED flashes at a varying rate, depending on whether the unit IP address is configured. The Run Mode and Auto Reset Mode indicator descriptions are given in Table 1.

42