NetWare Version 4.x and 5.x RPRINTER Setup

4.Enter the password. If this password is not yet set, press ENTER at the password prompt. Otherwise, enter the password that is already stored in the unit:

password

You are now logged in to the unit as a root user and can access any npsh command on the unit.

NOTE: Because npsh.exe makes use of broadcasts, you may have problems communicating across a router.

NetWare Version 4.x and 5.x RPRINTER Setup

The Ethernet Interface can be configured to service both RPRINTER, NDS mode, and PSERVER, bindery mode.

Use the following procedure to set up an RPRINTER form of attachment on a 4.x or 5.x server:

1.The Ethernet Interface requires a bindery server login on the 4.x or 5.x as the first step to servicing RPRINTER. This bindery login is necessary for registering the Ethernet Interface Pserver name; no bindery queues or printers are set up. Using PCONSOLE, bindery mode, create a bindery printer server object whose name matches that of the Ethernet Interface at the root context of the 4.x or 5.x box (e.g., M_03092B). After creating the bindery PrintServer on the 4.x or 5.x server, reboot the Ethernet Interface and print out the E-NET Test Page to make sure there is a successful server login.

2.Using either PCONSOLE in NDS mode or NWADMIN:

a.Create an NDS queue (any name you want), or simply use an existing one

b.Create a print server to use (any valid name, or choose one already in existence)

c.Create a printer object to use with the print server object you chose or created, and attach it to the chosen queue

185

Page 185
Image 185
IBM 6500 manual NetWare Version 4.x and 5.x Rprinter Setup