IBM 6500 manual None NONE, *CHKFIRST, *CHKALL, Libcrtaut, Yes

Chapter 9 Configuring On iSeries As An IPDS Printer

Cut sheet emulation mode	*NONE	*NONE, *CHKFIRST, *CHKALL
Use DBCS simulation fonts	*NO	*YES, *NO
Replace	*YES	*YES, *NO
Authority	*LIBCRTAUT	Name, *LIBCRTAUT,
		*CHANGE...

Figure 33. Example CRTPSFCFG Command (V4R2 and above)

3.The following parameters are recommended: PSF configuration (PSFCFG)

The name used for this PSF configuration object. The name must match the user-defined object name (USRDFNOBJ) in the printer DEVD.

PSF configuration (PSFCFG)

The name used for this PSF configuration object. The name must match the user-defined object name (USRDFNOBJ) in the printer DEVD.

IPDS pass through (IPDSPASTHR)

To print SCS files, specify *YES, PSF transforms SCS into IPDS before printing.

Release timer (RLSTMR)

Specifies the amount of time to wait before a session or dialog is released without terminating the writer. The ACTRLSTMR parameter specifies when this timer is to be activated. Set the parameter to a value at least equal to the TIMEOUT value on the printer. IBM recommends *SEC15.

Page size control (PAGSIZCTL)

Specifies if the page size (forms) is set by PSF. Usually set to

*YES.

Remote Location name or address (RMTLOCNAME)

Enter the IP address or hostname of the printer.

254