IBM 6500 manual Set Commands

Set Commands

set sysinfo email emailname@domain

Example: set sysinfo email joe@IBM.com

Define the user email address to receive printer and job logging information from a particular logpath on the Ethernet Interface. E-mail name is the host or IP name of the user.

Default: Unconfigured.

set sysinfo labelname [<string>] Example: set sysinfo name salesprinter

Set a descriptive name defined by <string> for Ethernet Interface identification purposes. This is not used in the operation of the print server in any way.

set sysinfo location [<string>] Example: set sysinfo location salesdept

Set the physical location of the Ethernet Interface. This is for identification purposes and is not used in the operation of the print server in any way.

set sysinfo loginfo [-]sys [-]tcp [-]ipx [-]spx Example: set sysinfo loginfo -sys ipx

Set the Ethernet Interface debugging information type. Usually this information includes unexpected errors or exceptions from the print server divided into these groups:

sys	General system messages
tcp	TCP stack messages
ipx	IPX stack messages
spx	SPX stack messages

NOTE: This is not printer or job logging information.

set sysinfo logport nullprnsyslog Example: set sysinfo logport null

Define to where the debugging information should be sent. This can be sent to an output device off of the Ethernet Interface I/O port or to a central TCP/IP host running a SYSLOG daemon.

To set TCP/IP host, use the command set sysinfo syslog hostIPaddress.

353