IBM 6500 manual Setting The Ethernet Interface NDS Context NDS Setups

Chapter 7 Novell Ethernet Interface Configuration (10/100Base-T)

Manual (Telnet) Method

1.Telnet to the print server: telnet ipaddress

NOTE: If prompted for a “User ID” and password first, type root for the ID and press ENTER at the password prompt (since there is no password by default).

2.You should see a prompt with the Ethernet Interface IP address:

ipaddress:root>

3.At the prompt, enter:

store pserver novell mode [nds bindery auto]

4.Reset the unit to make the changes take effect: reset

Setting The Ethernet Interface NDS Context (NDS Setups)

The Ethernet Interface allows you to store the print server object in any context within the NDS tree you choose. By default the Ethernet Interface will look for the print server object in the same context as the file server object it connects to is stored in.

HTML Method

1.Load a Web browser on a network station that can communicate with the print server over TCP/IP.

2.Direct your Web browser to URL:

http://EthernetInterfaceIPaddress/ networkConf.html

(e.g., http://192.75.11.9/networkConf.html).

NOTE: If prompted for a “User ID” and password first, type root for the ID and press ENTER at the password prompt (since there is no password by default).

3.Look under the “Novell” section and enter the new context in the “NDS Context” field.

202