IBM 6500 manual Define the Printer to JES, JES2 Printer Definitions, JES3 Printer Definitions

Chapter 10 Configuring PSF for z/OS to Print IPDS Files

Define the Printer to JES

When a TCP/IP-attached printer is to be used with JES, it must be defined for deferred printing mode with JES.

JES2 Printer Definitions

Below is an example of the JES2 printer definition initialization member, located in the system PARMLIB:

FSS(FSS1),PROC=PSFPROC,HASPFSSM=HASPFSSM

PRT1 FSS=FSS1,MODE=FSS,PRMODE=(LINE,PAGE,SOSI1), CLASS=C,UCS=0,SEP,NOSEPDS,CKPTPAGE=100,

DRAIN,MARK,TRKCELL=YES

The above example is correct for JES2 3.11 and above. For earlier versions of JES2, the statement is named FSSDEF and would be stated as FSSDEF FSSNAME=FSS1.

The value you specify for the PROC parameter must match the name on the PSF Startup procedure.

JES3 Printer Definitions

Below is an example JES3 printer definition. This example is not executable, but it is intended to help the JES3 systems programmer define the printer to the z/OS host.

FSSDEF,TYPE=WTR,FSSNAME=FSS1,PNAME=PSFPROC,SYSTEM=SYS1, TERM=NO DEVICE,JNAME=PRT1,JUNIT=(,SYS1,,OFF), FSSNAME=FSS1, MODE=FSS,PM=(LINE,PAGE,SOSI1), CHARS=(YES,GT12),

The value you specify for the JNAME parameter must match the name of the printer in the PSF Startup procedure.

The value you specify for the PNAME parameter must match the name on the PSF Startup procedure.

272