IBM 6500 manual NetWare Version 4.x and 5.x Pserver Setup

NetWare Version 4.x and 5.x PSERVER Setup

10.Type the name of the Ethernet Interface. The default is

M_xxxxxx, where xxxxxx represents the last six digits of the network adapter's Ethernet address (e.g., M_091C1A).

11.Select this new print server and press ENTER.

12.Select PRINTERS.

13.Press INSERT to add a new printer (d1prn) to the list.

14.Select this new printer and press ENTER. Go to the Type field.

15.Press ENTER at this field and select DEFINED ELSEWHERE. If DEFINED ELSEWHERE is not available, choose PARALLEL.

16.Press ENTER on the Print Queues Assigned field.

17.Press INSERT to display all queues; select the one you defined in step 5 and press ENTER.

18.Select a priority and press ENTER. Priority 1 should be sufficient.

19.Press ESCAPE, saving your changes, until you are back to Main Menu.

20.Reboot the Print Server by repowering the printer.

21.Check the CURRENTLY ATTACHED SERVERS and verify the print server is active.

22.Press ESCAPE until you are out of the PCONSOLE.

Even though the entire print set up is done through PCONSOLE, you may want to communicate directly with the print server to modify settings, monitor the unit, etc. To communicate with the print server, the optional host software, npsh.exe, is included. npsh.exe is a DOS executable program that can be run from a DOS prompt on a NetWare workstation.

183