IBM 6500 manual NetWare Version 4.x and 5.x Pserver Setup

Chapter 6 Novell Host Configuration

NetWare Version 4.x and 5.x PSERVER Setup

Ethernet Interface destinations are case sensitive and will not be recognized if they are typed incorrectly. By default, they are all lower case. If you are setting up a NetWare 4 environment, the destination must be renamed to uppercase to match the PCONSOLE entry.

The Ethernet Interface can be used in a NetWare 4 or 5 environment with either of the following options:

•Set the Ethernet Interface up as a PSERVER, replacing a dedicated printer.

•Set the Ethernet Interface up as an RPRINTER, interacting with an existing PSERVER (see page 185).

NOTE: Following a PSERVER setup, bindery emulation is required.

To configure the Ethernet Interface as a PSERVER in a NetWare 4 environment:

1.Log in to the Novell as supervisor.

2.Enter PCONSOLE.

3.Press F4.

4.Select PRINT QUEUES.

5.Press INSERT to add a queue.

6.Type in a new queue name and press ENTER.

7.Press ESCAPE.

8.Select PRINT SERVERS.

9.Press INSERT to add the new print server.

182