IBM 6500 manual Miscellaneous Commands

Miscellaneous Commands

close tcp TCPindexnumber

Example: close tcp 3

Close the a TCP/IP connection between a TCP/IP host and the Ethernet Interface. The TCPindexnumber can be retrieved from “debug tcp” output.

disable ioportdestinationprinter mgr Example: disable prn

Disable an I/O port so that queued jobs are not printed, or disable a destination so jobs cannot be queued to it.

Example: enable printermgr

Enables the printer debug port to allow remote printer management software to function.

enable ioportdestination Example: enable prn

Enable an I/O port so that queued jobs are printed, or enable a destination so jobs can be queued to it.

load [default]

Load the settings stored in flash memory and use them as the current or working settings. If default is specified as well, factory settings will be loaded.

lpstat [ioport] [jobID] Example: lpstat prn

Display active and queued jobs and I/O port status for a given ioport or jobID. Specifying one of these parameters will shorten the output and focus on the particular I/O port or print job specified.

keycode

Determine the hexadecimal value for a key to be used as the escape character with the Ethernet Interface built-in telnet command.

361