IBM 6500 manual Procedure B

Chapter 17 Ethernet Interface Security

8.Wait about 1 minute for the adapter to reboot after the reset command.

9.Turn the printer off, wait 15 seconds, and turn the printer back on. Wait 1 minute for the adapter to boot.

10.Telnet back into the adapter, logging in as root with no password, and pressing Enter.

Procedure B

1.Turn the printer off.

2.Flip dip switch 2 down on the Ethernet adapter.

3.Turn the printer on, and wait about 1 minute for the adapter to boot.

4.Telenet to the adapter.

5.Login as root and press Enter for the password.

6.Flip dip switch 2 up.

7.Type the following at the telnet prompt: set user passwd root

save reset

8.Wait about 1 minute for the adapter to reboot after the reset command.

9.Turn the printer off, wait 15 seconds, and turn the printer back on. Wait 1 minute for the adapter to boot.

10.Telnet back into the adapter, logging in as root with no password, and pressing Enter.

368