Changing The Ethernet Interface Name (NDS and Bindery Setups)
199
HTML Method
1. Load a Web browser on a network station that can
communicate with the print server over TCP/IP.
2. Direct your Web browser to URL:
http://EthernetInterfaceIPaddress/
adminConf.html
(e.g., http://192.75.11.9/adminConf.html).
NOTE: If prompted for a “User ID” and password first, type in
root
for the ID and press ENTER at the password prompt (since
there is no password by default).
3. Look under the “System Information” section and enter the new
name into the “Name” field.
4. Click the SUBMIT button when done and physically repower
the printer to make the new settings take effect.
Manual (Telnet) Method
1. Telnet to the print server:
telnet ipaddress
NOTE: If prompted for a “User ID” and password first, type
root
for
the ID and press ENTER at the password prompt (since
there is no password by default).
2. You should see a prompt with the Ethernet Interface IP
address:
ipaddress:root>
3. At the prompt, enter:
store pserver name name
4. Reset the unit to ensure the changes take effect.
reset