IBM 6500 manual Novell Host Configuration

Chapter 6 Novell Host Configuration

4.Load a PSERVER.NLM if one is not already loaded. This will be the PSERVER that the Ethernet Interface services as an RPRINTER, so it must match the PSERVER name given in step 2.

5.Enter PCONSOLE.

6.Select “Print Queue Information” from the PCONSOLE Main Menu.

7.Press INSERT to add a new queue to the list of currently defined queues.

8.Type in the name of this new queue when prompted, and press ENTER. This can be any name you would like.

9.Click ESCAPE to return to the Main Menu.

10.Select “Print Server Information” and press ENTER.

11.Press INSERT when the list of existing print servers displays.

12.Select the print server that you want the Ethernet Interface to service as an RPRINTER. This is the PSERVER.NLM loaded in step 4.

13.Select “Print Server Configuration” from the menu that displays.

14.Select “Printer Configuration” from the next menu to display a list of configured printers.

15.Select an item from the list (e.g., an existing printer name or “Not Installed”) to display the printer configuration window.

16.Assign a name (if not an existing printer) to this printer.

17.At the “Type” field, select “Remote Other/Unknown.”

18.Click ESCAPE to save the changes.

19.Click ESCAPE until you are back at the “Print Server Configuration” menu.

20.Select “Queues Serviced by Printer” to display a list of defined printers.

21.Select the printer you just defined and press ENTER.

22.At the list of queues that displays, press INSERT to add a queue to the list.

180