IBM 6500 manual Example set snmp alerts 1 warning -cutter

Chapter 16 Complete Command List

set snmp alerts <index> [-]all [[-]warning] [[-]offline] [[-]mediainput] [[-]mediaoutput] [[-]mediapath] [[-]marker] [[-]cutter] [[-]barcode] [[-]scanner] [[-]intervention] [[-]consumable] [[-]label] [[-]powercart] [[-]rfid]

Example: set snmp alerts 1 warning -cutter]

Specifies which alert groups are enabled for reporting via an SNMP manager, e-mail alert message, and/or Unix syslog daemon. See Table 8 on page 101 for a description of specific printer events belonging to each group.

<index> is the index number of the SNMP manager/alert table.

“-all” disables and “all” enables reporting of alerts in all alert groups. Individual alert groups can be selectively enabled or disabled via combinations of alert group switches. For example, to enable warning alerts and disable cutter alerts for SNMP table entry 1, enter the following:

set snmp alerts 1 warning -cutter

set snmp syslog <index> [-]active

The Ethernet Interface can also log SNMP alert messages to the defined SYSLOG host (see the ‘set sysinfo syslog’ command description). Use this command to enable or disable logging of alert messages for an SNMP alert table entry.

<index> is the index number of the SNMP alert table. “active” enables alert message logging, “-active” disables it.

set sysinfo contact [<string>]

Example: set sysinfo contact Paul_Harris

Set a person or department to contact in case of print server trouble.

set sysinfo email <email>

Example: set sysinfo email JohnDoe@IBM.com

Define the user email address to receive printer and job logging information from a particular logpath on the Ethernet Interface. Email name is the host or IP name of the user.

352