IBM 6500 manual Set antenna type

	Store Commands
WIRELESS	Set antenna type:
ADAPTER,	store ifc <ifnum> wlan antenna diverseprimaryaux
WIRELESS	<antenna-type>
	<ifnum> is the interface number for the WLAN device.
	<antenna-type> is the type of antenna to be used: “primary,”
	“aux” (auxiliary or external) and “diverse”. “diverse” allows the
	WLAN card to decide on the optimal antenna during operation.
WIRELESS	Set preamble length:
ADAPTER,	store ifc <ifnum> wlan preamble defaultlongshort
WIRELESS	<len-type>
	<ifnum> is the interface number for the WLAN device.
	<len-type> is the type of preamble length required. It can be
	“long,” “short,” or “default.” “default” allows the card to use its
	own factory default.
WIRELESS	Set power management mode:
ADAPTER,	store ifc <ifnum> wlan pmm onoff
WIRELESS	<ifnum> is the interface number for the WLAN device.
	The string “off” disables power-save mode. The string “on”
	enables power-save mode with a default sleep-time of 100ms.
WIRELESS	Set transmit power:
ADAPTER,	store ifc <ifnum> wlan txpwr <0-100>
WIRELESS	<ifnum> is the interface number for the WLAN device.
	<0-100> the power level as a percentage of full power.
WIRELESS	Set options:
ADAPTER,	store ifc <ifnum> wlan opts [[-]openauth][[-]intnl]
WIRELESS	<ifnum> is the interface number for the WLAN device.
	An option is enabled by including it in the list and disabled by
	preceding it with a '-' character in the list. Supported option is
	“intnl,” for international mode and “openauth” for open
	authentication.

331