IBM 6500 manual Configuring PSF for Ipds On V4R2 And Above, Crtdevprt

Chapter 9 Configuring On iSeries As An IPDS Printer

k.User-Defined Object (USRDFNOBJ)

To use a PSF configuration object, specify its name and library here. This object type must be *PSFCFG. For V3R7 and higher, a single PSF configuration object may be referenced by multiple device descriptions, if required.

Configuring PSF for IPDS On V4R2 And Above

To configure IPDS on the iSeries V4R3, use the following commands:

•CRTDEVPRT

•CRTPSFCFG (Optional)

Configuring AFP with CRTPSFCFG on V4R3 and above (Optional)

To configure the iSeries for IPDS printing on V4R3:

1. At the iSeries command line, enter a command in the form:

CRTPSFCFG PSFCFG(AFP/NETPRT6500-v) IPDSPASTHR(*YES) RLSTMR(*SEC15) TEXT(‘IBM 6500-v NETWORK ATTACHED PRINTER’) PAGSIZCTL(*YES) ACTRLSTMR(*NORDYF)

2. A completed screen looks like Figure 33.

252