IBM 6500 manual Change to the dest directory. Syntax

Chapter 5 SCO Setup

5.Change to the dest directory. Syntax:

cd dest

6.List the contents of this directory using the dir command and determine which destination/queue you would like to send the print job through. Most likely, you will select d1prn for the PRN port.

7.Change to this destination directory. Example:

cd d1prn

8.Change the mode to correspond with the type of file you are going to print. By default, ASCII is set for text-only files, but if you need to print both text and graphics, select binary using the bin command.

9.Place the file to be printed within this directory on the Ethernet Interface, so it can be spooled and printed.

Syntax:

put filename

10.Close the FTP session, unless you have more jobs to print. Syntax:

quit

164