IBM 6500 manual Ibm

Chapter 11 Configuration Screens

The following displays:

Mode: TN5250	Click here for TN3270 mode
Host	ok (eg. 204.191.175.114 or
	host.domain.com)
Port
Device Description
Message Queue Name
Message Queue Library
Device Type	IBM
WSCST Name
WSCST Library
Auto Connect
Start Auto Connect	Click here

3.Select TN3270E Mode. The following displays:

Configuration for Print Path d2prn

Mode: TN3270	Click here for TN5250 mode
Host	ok (eg. 204.191.175.114 or
host.domain.com)
Port	23
Resource Name
Auto Connect
Stop Auto Connect	Click here

NOTE: Changes will only take effect after you reset the IBM 6500-v from the System page.

4. Enter the address of your system for the host IP address

The port address is the port configured for your telnet server. It is usualy port 23.

The Resource name will be the printer name defined in the VTAM portion of your Telnet server configuration. For this example use RMT3.

298