IBM 6500 Using Telnet Commands for TN5250, User Supplied Values, Command List, Store Commands

User Supplied Values

User Supplied Values

iSeries: For this session, use the IP value from (step 4 above).

Device description: This is the name of the virtual device.

Auto connect:

•If true (enabled) then queue and device automatically attach.

•If not true (disabled) the command “tn dest dxprn start/stop” allows individual sessions to start or stop.

NOTE: Leave other values at their default descriptions.

Example of telnet session commands:

store tn dest d8prn iSeries 192.168.168.34 store tn dest d8prn devicedesc palletform store tn dest d8prn autoconnect

reset

This example creates a device/queue named “palletform” on the iSeries with IP 192.168.168.34. The Ethernet adapter initiates the connection each time it is reset or the printer power is cycled.

Using Telnet Commands for TN5250

Command List

The following commands for TN5250 are available via a Telnet session with the Ethernet.

Store Commands

store tn dest <dxprn>iSeries<IPaddress> store tn dest <dxprn>port<portnumber> store tn dest <dxprn>devicedesc<devicename>

store tn dest <dxprn>msgqname<msgqname>msgqlib<msgqlib>

store tn dest <dxprn>WSCSTname<WSCSTname>WSCSTlib<WSCSTlib>

store tn dest <dxprn>from default store tn dest <dxprn>[-]autoconnect

303