IBM 6500 manual For Wireless Ethernet with Symbol RF cards only

Chapter 16 Complete Command List

<len-type>indicates the selected preamble length (“long,” “short,”

or “default”).

<sleep-time>indicates the power-save sleep-time in milliseconds. If power-save is disabled (time is set to zero), “normal” (power-save off) displays.

<key-num>is the number identifying one of the four encryption keys, starting from one. Encryption is disabled if “Encryption disabled” displays.

<auth-method> is the authentication method e.g. open, shared, kerb, leap.

<power> is a percentage indicating the approximate fraction of full power.

<option-list>is a list of options that are enabled (disabled options are not shown).

<status> is the current access point association status (“disassociated” or “associated with <MAC address>”).

<comms-quality>indicates the strength or quality (in percent) of the wireless signal.

NOTE: The “list stored ifc” command does not display the “Status” or “Quality” lines.

list kerberos

For Wireless Ethernet with Symbol RF cards only.

list key

List the license details and license key number.

list logins

List any active user logins on the Ethernet Interface.

list logpath [logpath]

List the current logpath settings (e.g., names and mapped destinations).

358