IBM 6500 manual Changing The Ethernet Interface Mode NDS and Bindery Setups

Changing The Ethernet Interface Mode (NDS and Bindery Setups)

4.Reset the unit to make the changes take effect: reset

Changing The Ethernet Interface Mode (NDS and Bindery Setups)

The Ethernet Interface allows you to store a particular mode for the unit to operate in. This will be either NDS, Bindery, or autosense. If you use autosense, the Ethernet Interface will first attempt to log in to an NDS file server and, if it fails, will try to log in to a Bindery file server.

NOTE: If you are using both NDS and Bindery file servers in your setup, set the mode to auto.

HTML Method

1.Load a Web browser on a network station that can communicate with the print server over TCP/IP.

2.Direct your Web browser to URL:

http://EthernetInterfaceIPaddress/ networkConf.html

(e.g., http://192.75.11.9/networkConf.html).

NOTE: If prompted for a “User ID” and password first, type root for the ID and press ENTER at the password prompt (since there is no password by default).

3.Look under the “Novell” section and go to the “Service Type” field to select the appropriate mode.

4.Click the SUBMIT button when done and physically repower the printer to make the new settings take effect.

201