IBM 6500 manual Configuring An Interface For Ethernet, Type of service, Normal

Chapter 9 Configuring On iSeries As An IPDS Printer

Configuring An Interface For Ethernet

ADDTCPIFC is used to add a TCP/IP interface to iSeries. This step configures the iSeries for attachments to a TCP/IP network.

1. At the iSeries command line, enter the following command:

ADDTCPIFC INTNETADR ('9.99.15.188') LIND(ETHLAN)

SUBNETMASK('255.255.255.0')

2. Your completed screen should look like Figure 30.

System: ADDTCPIFC

Internet address:

Line description

Subnet mask:

Associated local interface	*NONE
Type of service	*NORMAL
Maximum transmission unit:	*LIND
Autostart:	*YES
PVC logical channel identifier
+ for more values
X.25 idle circuit timeout	60
X.25 maximum virtual circuits	64
X.25 DDN interface	*NO
TRLAN bit sequencing	*MSB

Figure 30. Example ADDTCPIFC Interface

244