IBM 6500 manual NetWare Version 3.x Rprinter Setup

NetWare Version 3.x RPRINTER Setup

23.Select the queue defined and press ENTER.

24.When prompted for a priority, press ENTER to select the default or select a priority.

25.Click ESCAPE until you have exited PCONSOLE.

26.Reload the PSERVER.NLM that the Ethernet Interface is to service as an RPRINTER.

27.Repower the Ethernet Interface by turning the printer off and then back on.

28.Wait two minutes and then check your PSERVER to see if the appropriate printer is being serviced. The PSERVER should indicate that the printer is “Waiting for job.”

At this point, the Ethernet Interface knows to receive any jobs this PSERVER.NLM has to send to it through the defined printer.

181