Pitney Bowes J693 manual SET Factory Defaults, Format Attributes, Imaging Mode

System Settings (continued)

SET FACTORY DEFAULTS		Parameters in this menu listing with the ‘ó’
		symbol are the designated defaults.
	SET FACTORY	Overwrite the current settings with the
	DEFAULTS	factory default settings.
		Note: The printer will reset
		automatically. All menu settings will be
		restored except CUSTOM ADJUSTMENTS
		and the media and ribbon calibration
		parameters.
FORMAT ATTRIBUTES		Affects the manner in which overlapping
		text and graphics are treated as the label is
		printed. Consult the Programmer’s Manual
		for details.
	TRANSPARENT	Intersecting text strings, images, and bar
		codes will not be printed. (An odd number
	ó	of overlapping objects will print.)
	XOR	Intersecting text strings, images, and bar
		codes print on top of one another.
	OPAQUE	Interacting text strings, images, and bar
		codes are obliterated by those formatted
		last. Each character cell is treated as
		opaque.
IMAGING MODE ♦		Instructs the printer whether it can pre-
		image the label format.
		Note: This selection can affect the
		accuracy of time-stamped labels and label
ó		throughput.
	MULTIPLE LABEL	The printer images multiple labels as
		memory permits, achieving the fastest
		throughput; however if time-stamping, the
		time will reflect the moment the label is
		imaged rather than when actually printed.
	SINGLE LABEL	The printer images the next label only after
		the previous label has been successfully
		printed; this single processing provides
		more accurate time-stamps with a minor
		cost to label throughput.

(Continued next page)

26 J693