6.1Fault and Warning Messages
When the printer detects a problem or the potential for a problem, a message is displayed and the Error Indicator (see Section 4.0.4) will be illuminated. There are two types of indications:
∙Fault Indication – the indicator ‘fast flashes’ with message.
∙Warning Indication – the indicator ‘slow flashes’ with message.
The Fault and Warning Messages are listed in the following two tables, including a brief description of each and possible solution(s).
Note: After the printer enters a fault condition, the fault must be corrected and then FEED key must be pressed to clear the condition.
Fault Messages:
| "Displayed"Message | Description | Possible Solution(s) | |
|
|
| The printer has | Try cycling the printer power |
|
|
| ||
|
|
| detected an analog | ‘Off’ and ‘On’. If the fault |
|
|
| to digital circuit | does not clear, call for |
|
|
| ||
| "" | converter failure. | service. | |
|
|
|
|
|
|
|
| The printer has | Try cycling the printer power |
|
|
| ||
|
|
| detected a Direct | ‘Off’ and ‘On’. If the fault |
|
|
| Memory Access | does not clear, call for |
|
|
| ||
|
|
| failure. | service. |
|
|
|
|
|
(Continued next page)
J693 | 69 |
