Pitney Bowes J693 Advanced Entry Calibration, Step, Operator Action, Displayed Message, Comment

5.2.2Advanced Entry Calibration

The second calibration method is the Advanced Entry Calibration. This method overrides all previous calibration settings and should be used only when the Standard Calibration method has failed. The procedure has two parts:

1)Sensor Gain: Different algorithms are used for sampling, to produce different measurements for the media.

2)Sensor Levels: At a selected gain, values are directly input for ‘Paper’, ‘Mark’ or ‘Gap’, and ‘Empty’ variables.

To perform an Advanced Entry Calibration:

Step	Operator Action		Displayed Message	Comment
1	Turn ‘On’ the printer.
			"￿
2				See Section
	Press the	key to enter	￿
			￿￿￿￿"￿￿￿￿￿￿￿￿	4.0.2 for
	Menu Mode.			details.

Raise the printhead assembly for visual access to the Media Sensor and media.

3	Press the		key to		See Section
				￿￿￿￿
	enter the Media Settings			￿￿￿￿"￿￿￿￿	4.1.1 for
	menu.				details.
4	Press the		key.		See Section
				"￿￿￿￿
					4.1.1 for
					details.
5	Press the		key. Use		See Section
				￿￿￿￿￿￿￿￿
	the	key to scroll to		J￿"￿	4.1.1 for
	the desired sensor type and				details.
	press the		key to		The enabled
	enable the selection.
					selection will
					be indicated
					with an *.
(Continued next page)
J693					47