4.3.4Dot Test Pattern Label
The Dot Test Pattern Label tests the printhead to determine the condition of each thermal element. Pattern examples are shown below. To print a Dot Test Pattern Label:
n
Press the | key. |
o
pUse the 
key to scroll to ‘Dot Test Pattern’.
qUse the 
key to select a quantity; see Section 4.0.3.
Press the | key to start printing. |
Good Test Pattern Label:
Even pattern consistency indicates the printhead is operating normally.
Faulty Test Pattern Label:
Streaks can indicate a dirty or faulty printhead. See Section 5.5 for cleaning instructions.
J693 | 37 |
