Pitney Bowes J693 manual Host Settings

Communications (continued)

HOST SETTINGS					Settings which affect all communications
	HOSTó				with a host.
			TIMEOUT		The number of seconds a communications
	10 SEC			(1-60)	port must be idle before the printer may
					process data from a different port. This
					value is also used to “timeout” an image /
					label download.
	CONTROL CODES ♦				Allows the operator to change the prefix
					of the commands interpreted by the
		a			printer.
		STANDARD CODES			Hex 01 = SOH command; Hex 02 = STX
					command; Hex 0D = CR
		ALTERNATE CODES			Hex 5E = SOH command; Hex 7E = STX
					command; Hex 0D = CR
		ALTERNATE CODES 2			Hex 5E = SOH command; Hex 7E = STX
					command; Hex 7C = CR
		ALTERNATE CODES 3			Hex 5E = SOH command; Hex 23 = STX
					command; Hex 0D = CR
	FEEDBACK MODE				Returns a Hex 1E, [RS], after each label
					successfully prints, and a Hex 1F, [US],
					after each batch of labels is printed.
		aENABLED			Feedback characters are sent to the host.
		DISABLED			No feedback characters are sent.

J693 29