Pitney Bowes J693 manual Hqlrvi, Step, Operator Action, Displayed Message, Comment

Step	Operator Action			Displayed Message			Comment
6	Press the		key.		"￿￿￿"￿￿￿￿		See Section
				￿￿￿￿￿￿￿"￿￿#￿
	Use the	key to					4.1.1 for
	scroll to ‘Sensor						details.
	Calibration’.						Press the
	Press the		key.					key to
							abort this
							procedure.
7	Use the		key to				See Section
				￿￿	"#"￿￿￿￿
	scroll to ‘Advanced		Entry’.	"￿￿"￿￿￿￿￿￿￿￿			4.1.1 for
	Press the		key.				details.
8	Press the		key.				See Section
				""￿￿		￿￿￿
				￿￿￿￿￿￿"￿￿			4.1.1.
9	Place the label under the						Ensure that an
				JQQ￿"￿￿￿￿"￿		]Q]<<<LRV
	Sensor Eye Mark and lower						unmarked label
	the printhead.						area (without
					-OR-
							pre-printing) is
	Using the		key	￿"￿￿￿￿￿￿		]<<<_	in the Media
	increment the Gain			JQQ		HQLRVI	Sensor.
	Number. Press the
	key to select the new setting
	and then record the sensor
	reading (the ‘yyy’ value).
	Repeat this process for each
	of the 16 Gain Numbers.
	These are the Label Values.

(Continued next page)

48 J693