rTurn each Adjustment Screws clockwise about ¼ a turn (or 1/8 a turn for finer adjustments). Print another Validation Label and examine the print quality. Repeat this step until labels with even print contrast (darkness) and
sacceptable print quality are produced.
Tighten the Locking Screws. Print a final Quick Test label to verify the adjustment.
Note: When the Locking Screws are ‘snug’, turning the Adjustment Screws counter-clockwise will not move the printhead outward. If you have adjusted the printhead too far inward, restart the entire procedure.
54 | J693 |
