Pitney Bowes J693 manual Gpio Port, END of Print

Printer Options (continued)

GPIO PORT			The physical presence of the optional GPIO
			port must be detected to show the selections in
			the menu system.
	GPIO		Instructs the printer to update the output
			signals and to wait for the Start of Print Signal
			to print a label.
		aENABLED	Yes
		DISABLED	No
	END OF PRINT		Defines the operation of the printer’s End of
			Print signal as sent to the applicator. This
			signal indicates that the printer has completed
			the print cycle.
		LOW STATUS	A steady Low (0 VDC) during the print cycle.
		HIGH STATUS	A steady High (5 VDC) during the print cycle.
		LOW PULSE	A Low Pulse (0 VDC for 30 ms) at the end of
			print.
		HIGH PULSE	A High Pulse (5 VDC for 30 ms) at the end of
			print.
		DISABLED	No indication.

J693 23