GoVideo DDV2001 manual M E R R E C O R D I N G Error S

T I M E R R E C O R D I N G E R R O R S

N O T E

...continued

		SET SPEED [1-3]				: 1
1 Aug		2001		10:30PM			1H00M
Su	Mo	Tu	We		Th	Fr		Sa
			1		2	3	4
5	6	7	8		9	10	11
12	13	14	15		16	17	18
19	20	21	22		23	24	25
26	27	28	29		30	31
1-Time		Ch10			Deck 1			Auto

	press
		1	3	to set speed
	SELECT EVENT [1-16] :01
1	10:30 PM		On	Wednesdays
	1 H 30 M		Ch 10 Deck 1 Auto
2	- - : - - - -		- - -	- - - / - -
	- H - - M		Ch - -	Deck - - -
3	- - : - - - -		- - -	- - - / - -
	- H - - M		Ch - -	Deck - - -
4	- - : - - - -		- - -	- - - / - -
	- H - - M		Ch - -	Deck - - -
	/ To Move			= Select

T I M E R R E C O R D I N G E R R O R S

Ta p e M i s s i n g

Solution: Insert a tape in the record- ing deck.

Ta p e M i s s i n g Ta b

Solution: Insert a video cassette with a record safety tab.

N o t R e a d y

Solution: The recording deck is already in use. Press STOP on this deck.

O v e r l a p p i n g E v e n t s

Solution: If two programmed events overlap, you will be prompted to either delete one of the events, or allow them to overlap. If you allow them to overlap, the event with the earliest starting time will be com- pletely recorded, then the remainder of the event with the next earliest starting time will be recorded.

1 0 S E T S P E E D

Press 1, 2, or 3 (or use the UP/DOWN arrow keys) to set the record speed:

1 - A u t o

Activates Complete Program Record (see note below).

2 - S P

Standard Play. Use for best quality (a T-120 tape will record for 2 hours).

3 - S L P

Super Long Play. Use for maximum recording time (a T-120 tape will record for 6 hours).

1 1 V I E W E V E N T S U M M A R Y

Press MENU to confirm the event and view a summary of all programmed events.

•The event is now stored in memory and will record at the scheduled time. It is not neces- sary to turn the VCR off or put it into a “Timer” mode; the event will record regard- less of the state of the VCR.

•The “Timer” indicator will light on the front panel display. If there is a timer recording error, the “Timer” indicator will blink (see “Timer Recording Errors” below).

•To program another event, select any avail- able event number.

•To edit an event, select its event number.

•To delete an event, use the up/down arrow keys to select it, then press CLEAR.

•To exit the Select Event screen, press MENU.

•Complete Program Record (CPR) adjusts the recording speed to make sure you won’t run out of tape before the Timer Recording is complete. With Record Speed set to “Auto,” the VCR will begin recording in SP. It will then calculate how much time is remaining on the tape and adjusts the record speed to SLP if necessary. If there is not enough room to record the entire show, the VCR will record in SLP until the end of the tape is reached.

18

Dual-Deck VCR User’s Guide