21

7 - Edit

press
press
press
COPY SETTINGS
1 Comm. Free Copy On
2 EZ Copy Off
3 Speed Matching On
4 Copy Audio Insert Off
/ = Move = Sel MENU = Quit
1 Copy Settings
2 Playback Settings
3 Record/Edit Settings
4 Channel Settings
5 VCR Settings
6 Timer Recording
7 Language/Langue
/ = Move = Sel MENU = Quit
1
4
for
Copy Audio Inser
t
MAIN MENU
MENU
COPY AUDIO INSERT
1 OPEN MAIN MENU
Press MENU.
2 SELECT “COPY SETTINGS”
Press 1.
3 SET COPY AUDIO INSERT
Press 4 to choose from the following:
Off
Copy Audio Insert is disabled. The existing
audio will be copied.
Aux
While copying, a new linear (mono) audio
track will be recorded from an external
audio source connected to the front audio
jack.
4 CONNECT AUDIO SOURCE
Connect your external audio source to the
front audio input using standard RCA audio
cables; see notes below.
5 CUE TAPES
Cue up all devices:
• Source tape in Deck 1.
• Target tape in Deck 2.
• The external audio source (tape player,
CD player, etc.) connected to the front
audio input.
6 COPY NEW AUDIO TRACK
Press COPY TAPE on the VCR, and press
PLAY on your external audio source at the
same time.
• The new audio signal will be copied in
place of the original audio track.

Follow these steps to insert a new audio track, such as recorded

music or narration, onto your target tape. The new audio can be

recorded from the front audio input.

NOTES
• If you wish to use a microphone to insert the new audio track, it must be connected to a preamp.
• Do not connect speaker outputs to the VCR.
• If there is no audio signal, the audio track will be blank.
• Copy Audio Insert automatically reverts to “Off” when the VCR is turned off.