NEC NDA-24298 manual System Message 7-0 is registered when no errors are detected

ASYD : Assignment of System Data

	SYSTEM			BIT
SYSTEM		DATA	CORRESPONDING
	DATA
DATA		(DATA)		DATA
	INDEX									SYSTEM DATA CONTENTS
TYPE		00 – FF
(SYS)	(INDEX)	(Hex)	DATA
	0 – 511				BIT
			0/1
						System Message “7-0” is registered when no errors are detected
					b0	by the Routine Diagnosis Program (Refer to INDEX 89 and 90)
						0/1 = Not Registered/Registered
						System Message “7-P” is registered when an error is detected by
					b1	the Routine Diagnosis Program (Refer to INDEX 89 and 90)
						0/1 = Not Register/Register
					b2	Fault Recovery Pattern upon TRK Ineffective Hold Detection
							b3	b2
							0	0	=	Release all calls other than basic calls (two-way
										calls), and register all call status.
1	86				b3	0		1	=	Register all call status
						1		0	=	Release all calls and register all call status
						1		1	=	Not used
						System Message Automatic output to System printer
					b4	(SYS 1, INDEX = 38, 39)
						0/1 = Not Required/Required
			0		b5	Not used
			0		b6	Not used
			1		b7	System Message Contents
						0/1 = Simplified/Detailed (Always assign “1.”)

CHAPTER 4 NDA-24298

Page 96

Issue 1