NEC manual NDA-24298CHAPTER

ASYD : Assignment of System Data

	SYSTEM			BIT
SYSTEM		DATA	CORRESPONDING
	DATA
DATA		(DATA)		DATA
	INDEX						SYSTEM DATA CONTENTS
TYPE		00 - FF
(SYS)	(INDEX)	(Hex)	DATA
	0 - 511				BIT
			0/1
					b0	Output Port for SMDR A Apparatus
						• When b4 = 0 (IOC equipment No. 0)
					b1
						• b0 = Port 0	b1 = Port 1	b2 = Port 2b3 = Port 3
					b2
						• When b4 = 1 (IOC equipment No. 1)
					b3	• b0 = Port 4	b1 = Port 5	b2 = Port 6 b3 = Port 7
	288					• “1” is to be assigned to each bit corresponding to the Port No.
					b4
						Note 1, Note 2, Note 3
			0		b5	Expanded SMDR for “A” apparatus.
			0		b6	Not used
			0		b7
					b0	Fault detection timer of SMDR A
					b1	Value for the first digit (min):			•	Timer value ranges
					b2	(0~9) Hex				from 1 to 99 min-
						A~F Hex: Not used				utes.
					b3
1	289								•	00 Hex: Without
					b4
						Fault detection timer of SMDR A				fault detection
					b5	Value for the second digit (min):			Normally, Assign 00
						(0~9) Hex			Hex.
					b6
						A~F Hex: Not used
					b7
					b0	Output Port for SMDR B Apparatus
						• When b4 = 0 (IOC equipment No. 0)
					b1
						• b0 = Port 0	b1 = Port 1	b2 = Port 2 b3 = Port 3
					b2
						• When b4 = 1 (IOC equipment No. 1)
					b3	• b0 = Port 4	b1 = Port 5	b2 = Port 6b3 = Port 7
	290					• “1” is to be assigned to each bit corresponding to the Port No.
					b4
						Note 1, Note 2, Note 3
					b5	Expanded SMDR for “B” apparatus.
					b6	Not used
					b7

Note 1: Among the SMDR equipment that has the same IOC equipment number, double assignment of the port is rejected.

Note 2: The ports to be designated by SYS-1, INDEX 288, 290, 292, and 294 are limited to those designated as SMDR by AIOC.

Note 3: This data is assigned at the node to which SMDR with IOC interface is connected. In case SMDR is not connected to the node, this data setting is fixed to “0”.

NDA-24298CHAPTER 4

Page 149

Issue 1