NEC NDA-24298 manual ACIC1 Assignment of CIC Code Data

ACIC1 : Assignment of CIC Code Data 1

ACIC1: Assignment of CIC Code Data 1

1.General

This command is used for CCIS and/or ISDN data programming, and is assigned in the Common Channel Signaling Controller Group (CSCG) for a determinate Point Code (PC).

Note: In this command, Determinate Point Code is synonymous with DestinationPoint Code; the terms are used interchangeably.

2.Precautions

1.ACIC2 command assignment is also required for CCIS, and the PC parameter is an intermediate of those two commands.

2.ACIC2 command is not required for ISDN.

3.The PC parameter should correspond to the data assigned by the ADPC command.

4.The CSCG parameter should correspond to the one assigned by the ACSC command.

5.When this command is used for CCIS, all Point Codes (PC) within the network (except the Originating Point Code) should be assigned.

3. Data Entry Instructions

PC

Determinate Point Code assigned by the ADPC command and the final destination's Point Code in CCIS network.

CSCG

Assign any even number ranging from 2 to 254, however, the exception is 128.

DETERMINATE POINT CODE (PC)	COMMON CHANNEL SIGNALING CONTROLLER
1-16383	GROUP NUMBER (CSCG) 2-255
1	130

CHAPTER 4 NDA-24298

Page 642

Issue 1