NEC NDA-24298 manual Acfcl Assignment of Call Forwarding by SFC for LDM

ACFCL : Assignment of Call Forwarding by SFC for LDM

ACFCL : Assignment of Call Forwarding by SFC for LDM

1.General

This command is used to readout, assign, and delete the data related to Call Forwarding features. The data is written in the Local Data Memory (LDM).

2.Precautions

1.Depending on the system data setting by ASYD SYS1, INDEX5 bit0 (Access Code for C.F. – Busy and C.F. – Don’t Answer is the same or separated) and INDEX79 bit2 (Split Call Forwarding is in service or not), required parameters differ in this command. See the Data Sheet on the next pages for required parameters as to each type.

2.The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8.

3. Data Entry Instructions

D/N

D = Day Mode

N = Night Mode

SFC

Enter the Service Feature Class defined by the ASFC command. Since SFC=0 is preserved for ATTCON, a station can use the SFC in the range from 1 to 15.

DAY/NIGHT

MODE

(D/N)

TENANT NUMBER (TN)

SERVICE FEATURE CLASS (SFC) 0-15

Maximum 24 digits can be assigned to the Call Forwarding destination number as to each feature.

CALL FORWARD ALL	CALL FORWARD BUSY	CALL FORWARD DO NOT
DESTINATION	DESTINATION	ANSWER DESTINATION
(CFAD)	(CFBD)	(CFDD)
MAX. 24 DIGITS [0-9, *, #]	MAX. 24 DIGITS [0-9, *, #]	MAX. 24 DIGITS [0-9, *, #]
CALL FORWARD ALL CALLS	CALL FORWARD BUSY	CALL FORWARD DO NOT ANSWER
DESTINATION FOR STATIONS	DESTINATION FOR STATIONS	DESTINATION FOR STATIONS
(CFAS)	(CFBS)	(CFDS)
MAX. 24 DIGITS [0-9, *, #]	MAX. 24 DIGITS [0-9, *, #]	MAX. 24 DIGITS [0-9, *, #]
CALL FORWARD ALL CALLS	CALL FORWARD BUSY	CALL FORWARD DO NOT ANSWER
DESTINATION FOR TRUNKS	DESTINATION FOR TRUNKS	DESTINATION FOR TRUNKS
(CFAT)	(CFBT)	(CFDT)
MAX. 24 DIGITS [0-9, *, #]	MAX. 24 DIGITS [0-9, *, #]	MAX. 24 DIGITS [0-9, *, #]

Note: Unnecessary parameters can be skipped owing to the kind of Call Forwarding features.

NDA-24298CHAPTER 4

Page 745

Issue 1