NEC NDA-24298 manual Equipment number, double assignment of port is, Rejected

ASYD : Assignment of System Data

	SYSTEM			BIT
SYSTEM		DATA	CORRESPONDING
	DATA
DATA		(DATA)		DATA
	INDEX							SYSTEM DATA CONTENTS
TYPE		00 - FF
(SYS)	(INDEX)	(Hex)	DATA
	0 - 511				BIT
			0/1
					b0	Fault detection timer of SMDR B				•	Timer value ranges
					b1	Value for the first digit (min):
											from 1 to 99 min-
					b2	(0~9) Hex					utes.
						A~F Hex: Not used
	291				b3					•	00 Hex: Without
											fault detection
					b4	Fault Detection timer of SMDR B
											Normally, Assign 00
					b5	Value for the second digit (min):
											Hex.
					b6	(0~9) Hex
						A~F Hex: Not used
					b7
					b0	Output Port for SMDR C Apparatus
						• When b4 = 0 (IOC equipment No. 0)
					b1
						•	b0 = Port 0	b1 = Port 1	b2 = Port 2 b3 = Port 3
					b2
						• When b4 = 1 (IOC equipment No. 1)
					b3	•	b0 = Port 4	b1 = Port 5	b2 = Port 6b3 = Port 7
						“1” is to be assigned to each bit corresponding to the Port No.
						Note 1: Among the SMDR equipment that has the same IOC
							equipment number, double assignment of port is
							rejected.
1	292				b4	Note 2: The ports to be designated by SYS-1, INDEX 288, 290,
							292, and 294 are limited to those designated as SMDR
							by AIOC.
						Note 3: This data is assigned at the node to which SMDR with
							IOC interface is connected. In case SMDR is not
							connected to the node, this data setting is fixed to “0”.
					b5	Expanded SMDR for “C” apparatus.
					b6	Not used
					b7
					b0	Fault detection timer of SMDR C
					b1	Value for the first digit (min):				•	Timer value ranges
					b2	(0~9) Hex					from 1 to 99 min-
						A~F Hex: Not used					utes.
					b3
	293									•	00 Hex: Without
					b4	Fault detection timer of SMDR C
											fault detection
					b5	Value for the second digit (min):					Normally, Assign 00
					b6	(0~9) Hex					Hex.
						A~F Hex: Not used
					b7

CHAPTER 4 NDA-24298

Page 150

Issue 1