NEC NDA-24298 manual To 30 min, ASYDN, SYS1, Index

ASYDN : Assignment of System Data in Network Data Memory

SYSTEM	SYSTEM	DATA	BIT
	DATA		CORRESPONDING
DATA		(DATA)
	INDEX		DATA		SYSTEM DATA CONTENTS	(MDATA)
TYPE		00 – FF
	(INDEX)
(SYS)		(Hex)	DATA 0/1	BIT
	0 – 1535
	80	00			Not used

~	~			~
90	00				Not used
		0	b0		Not used
		0	b1
			b2		Grades of System Message that can be registered:
					b3		b2
				0		0		=	Register All System Message Data
				0		1		=	Register System Message Data higher than grade
			b3						1 (SUP, MN, MJ)
91				1		0		=	Register System Message Data higher than grade
									2 (MN, MJ)
				1		1		=	Register System Message Data higher than grade
									3 (MJ)
		0	b4
		0	b5		Not used
		0	b6
	0		b7
92~158	00				Not used
1					OG Trunk Queuing Automatic					The duration before the OG
					Cancel Timer (for Fusion Ser-					Queuing memory becomes
					vice):					cleared if no trunks become
			b0~b6		Miscellaneous Timer Counter					idle. Timer Value Setting is
					(MTC) is to be assigned a val-					MTC ⋅ 30 sec.
					ue from 0 Hex to 7F Hex
				(0~127).						Note: When this data is
159										00 Hex, default
										data is
										automatically set
			b7		Not used					to 30 min.
										This timer is effective when
										ASYDN, SYS1, INDEX 68,
										b3 = “1.”
160	00				Not used
			b0~b5		Not used
					Timing Start using “#” code
161			b6		0/1 = Ineffective/Effective
					Timing Start using “*”
			b7		0/1 = Ineffective/Effective
CHAPTER 4						NDA-24298
Page 916
Issue 1