NEC NDA-24298 manual FKY = 52SPEAKER FKY = 57RECALL

AKYD : Assignment of Key Data for Dterm

9.The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8.

10.There is no default key data provided for Dterm (8-button type). The key data for all the line/feature buttons must be programmed. When assigning the key data of the line/feature button, take the following precautions:

(a)My Line Key must be assigned in KYN = 1-8, and KYN = 9-16 should be assigned KYI = 0 (Not used).

(b)The following function keys are basically fixed: FKY = 13:CONF (Three-Way Calling)

FKY = 18:TRANSFER (Call Transfer-All Calls)

FKY =20: HOLD (Non-Exclusive Hold/Exclusive Hold) FKY = 28:ANSWER

FKY = 51:MIC

FKY = 52:SPEAKER FKY = 57:RECALL

(c)Not used line/feature buttons should be assigned KYI = 0 (Not used).

11.There is no default key data provided for Dterm (24-button type/32-button type). The key data for all of the line/feature buttons must be programmed. When assigning the key data of the line/feature button, take the following precautions:

(a)My Line Key must be assigned in KYN = 1-24, and KYN = 25-40 should be assigned KYI = 0 (Not used).

My Line in KYN = 17-24 cannot be assigned without assigning any Line Key or any Function Key in KYN = 1-16.

(b)The following function keys are basically fixed. FKY = 13:CONF (Three-Way Calling)

FKY = 18:TRANSFER (Call Transfer-All Calls)

FKY = 20:HOLD (Non-Exclusive Hold/Exclusive Hold) FKY = 28:ANSWER

FKY = 51:MIC

FKY = 52:SPEAKER FKY = 57:RECALL

(c)Not used line/feature buttons should be assigned KYI = 0 (Not used).

NDA-24298CHAPTER 4

Page 439

Issue 1