NEC NDA-24298 manual Isdn, = Call PROC. + Alert, + Progress

					ARTIN : Assignment of Trunk Application Data for NDM
CDN				LOGICAL ROUTE NUMBER (1-899)
	TRUNK DATA
20	DVRST	Call restriction while Tie Line is backed up on
		ISDN.
		0	= No restriction
		1	= Speech call restriction (Speech. 3.1 kHz
			audio, 7 kHz audio calls are restricted)
		2	= Data call restriction (Unrestricted digital,
			restricted digital andVideo data are
			restricted.)
		3	= Both Speech and Data calls are restricted.
21	RSCT	Call restricted by Temporary Route Information
		0	= No restriction
		1 = Restriction
		Note:		This data	is effective when
				TMPRT = 1.
22	ROCG	Outgoing Call Account by Temporary Route
		Information
		0	= Not used		1 = Effective
		Note:		This data	is effective when
				TMPRT = 1.
23	RICG	Incoming Call Account by Temporary Route
		Information
		0	= Not used		1 = Effective
		Note:		This data	is effective when
				TMPRT = 1.
24	STSENQ	Status Inquiry Message Send
		0	= Out of service		1 = In service
25	MMNPASS	When assigning this data, always enter zero (0).				0	0	0	0
26	DLTK	(Japan only)				0	0	0	0
		When assigning this data, always enter zero (0).
27	CALN	(Japan only)				0	0	0	0
		When assigning this data, always enter zero (0).
28	NETINT	(Japan only)				0	0	0	0
		When assigning this data, always enter zero (0).
29	INBAND	When assigning this data, always enter zero (0).				0	0	0	0
30	RETMSG	(Australia only)
		Return Massage for Connect ISDN LINE with
		Analog Trunk
		0	= CALL PROC. + ALERT
		1	= CALL PROC. + ALERT or CALL PROC.
			+ PROGRESS

NDA-24298CHAPTER 4

Page 655

Issue 1