NEC NDA-24298 Adim Assignment of Dial Intercom Data, Module Group Dial Intercom Bridge, Tion BCR

ADIM : Assignment of Dial Intercom Data

ADIM: Assignment of Dial Intercom Data

1.General

This command assigns Dial Intercom service related data.

2.Precautions

1.To provide Dial Intercom Service, it is necessary to assign the following data in advance: ASYD command, SYS1, Index 59, b7 = 1

2.The number of Dterm stations that can be accommodated in a Dial Intercom Group and also the number of digits for Call Number (Dial Intercom STN) are determined by parameter N (Dial Intercom Digit Number).

3.When N = 0 is entered, a maximum of 10 Intercom Station Numbers can be assigned. When N = 1 is entered, a maximum of 64 Intercom Station Numbers can be assigned.

4.The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8.

5.Enter “My Line” Station Number of Dterm in the ICMSTN (Dial Intercom Station Number) parameter.

6.Compose a Dial Intercom Group with Dterm stations of the same Tenant Number (TN) under the same Module Group (MG).

7.From 1 to 50 Dial Intercom Groups can be composed on each Module Group (MG) basis.

8.An Intercom member can override another Intercom station in a two-party Intercom connection. This kind of overriding is referred to as INTERCOM BRIDGE.

3. Data Entry Instructions

N

0 = one digit (0-9)

1 = two digits (00-63)

BCR

0 = Restricted

1 = Allowed

MODULE	GROUP	DIAL INTERCOM		BRIDGE
GROUP	ID	DIGIT		CALL	TENANT
NUMBER	NUMBER	NUMBER		RESTRIC-	NUMBER	REMARKS
(MG No.)	(G-ID)	(N)		TION (BCR)	(TN)
	1-50	0/1		0/1
ICMCT	INTERCOM STATION		ICMCT	INTERCOM STATION		REMARKS
	NUMBER (ICM STN)			NUMBER (ICM STN)
0			5
1			6

CHAPTER 4 NDA-24298

Page 486

Issue 1