NEC NDA-24298 manual Acmo Assignment of Clocked Manual Override, Block, Date

ACMO : Assignment of Clocked Manual Override

ACMO: Assignment of Clocked Manual Override

1.General

This command assigns the Clocked Manual Override data, which is used for changing routes during a specific day and specific time period, such as a holiday (Month/Day/Hour/Minute).

2.Precautions

1.The BLOCK parameter is a data index (0-7). A maximum of eight kinds of Clocked Manual Override Data can be assigned.

2.The PTN parameter corresponds to the TDPTN parameter assigned by the AOPR/ASDC command.

3.The Clocked Manual Override data assigned by ACMO command has priority over the Time Pattern data assigned by the ATCP command.

4.Time is designated in Military Time. 24 cannot be used as Hour designation.

5.A single set of PTN (Pattern Number) and START/END date and time is to be assigned to a BLOCK Number. Also the same PTN can be specified to multiple BLOCK Numbers.

6.“PTN = 0” is also used in default setting (in unspecified time period). Thus the assignment “PTN = 0” means nothing in this command.

3.Data Entry Instructions

BLOCK

Enter a block number for a Clocked Manual Override data

DATE

Month/Day

ex.) 09/20 = September 20

BLOCK NUMBER	PATTERN NUMBER		START				END			REMARKS
(BLOCK)	(PTN)
0-7	0-7	DATE		TIME		DATE		TIME
		09	20	17	00	09	21	09	00

PTN

Pattern number (0-7) assigned by the AOPR/AOPRL/ASDC command.

TIME

Hour/Minute

NDA-24298CHAPTER 4

Page 295

Issue 1