NEC NDA-24298 manual Ahls Assignment of Hot Line Station

AHLS : Assignment of Hot Line Station

AHLS: Assignment of Hot Line Station

1.General

This command assigns the data related to the Hot Line service feature.

2.Precautions

1.Prior to assigning this command, the Hot Line station should be given the TEC = 14 (Hot Line class) by the ASDT/AAST command. Additionally, TEC = 13 (Data Terminal via Dterm) and TEC = 18 (Virtual

Line Appearance) can also be applied to the Hot Line service.

2.If you want to delete the station which applied Hot Line service, delete the Hot Line data using the AHLS command prior to deleting the station number by the ASDT/AAST command.

3.When the Hot Line destination is the outside party, assign the Abbreviation Digit Code (ADC) of the speed calling number using the ASPD command.

3.Data Entry Instructions

TYPE

1 = Station

2 = Outside party (ADC)

3 = Trunk Line

CON TN / STN Enter CON TN/STN data when TYPE = 1.

CON RT / TK

Enter CON RT/TK data when TYPE = 3 (Trunk Line).

HOTLINE TENANT NUMBER (HOT TN)

HOTLINE STATION NUMBER (STN)

CONNECTION

TYPE

(TYPE)

1-3

DESTINATION STATION'S TENANT NUMBER (CON TN)

DESTINATION

STATION NUMBER

(STN)

SPEED

CALLING

CODE (ADC)

MAX. 4

DIGITS

OPPOSITE TRUNK PARTY'S NUMBER

ROUTE (TK)

NUMBER

(CON RT)

HOT TN

Enter the tenant number of the Hot Line station.

ADC

Enter ADC when TYPE = 2 (Outside party).

The ADC should be assigned by the ASPD command.

NDA-24298CHAPTER 4

Page 497

Issue 1