NEC NDA-24298 ADA2T Assignment of DTE Attribute Data 2 Telephone Number, Telephone Number instead

ADA2_T : Assignment of DTE Attribute Data 2 – Telephone Number

ADA2_T : Assignment of DTE Attribute Data 2 – Telephone Number

1.General

This command is used to assign the Attribute Data for the data communication service feature of the data adapter (DA) with the Dterm and/or the data module (DM). The station data of ADA2 command can be assigned by using

Telephone Number instead.

2.Precautions

1.Only the Telephone Numbers assigned by the ALGSN command can be used. Telephone Numbers by the ALGSL command is not available in this command.

2.In case logging in to a LN, only the Telephone Numbers allocated to the stations within the logged-in node can be used in this command. Also, when logging in to the NCN, the data memory of the whole nodes in the network can be written.

3.When the designated station is not a DTE (DA/DM), the Attribute Data cannot be assigned and error code will result.

3.Data Entry Instructions

See data sheet in Section 4.

CHAPTER 4 NDA-24298

Page 510

Issue 1