NEC NDA-24298 manual Service Index SID

ASPAN : Assignment of Special Access Code for NDM

Note 4: When SRV = SSC (Service code), SID 56 (Floor Service) is assigned

SERVICE INDEX (SID) 1-63

56

NO.1

NO.1

(Kind of Assignment Number)

Available numbers are 0-15.

This data is used to assign Floor Service data by the ASPF command.

Note: When programming Floor Service data, ASYD SYS1

INDEX 165, bit7=1 must have been assigned.

Note 5: When SRV = SSC (Service code), SID 57 (Split Access) is assigned

SERVICE INDEX	NO.2	KIND
(SID) 1-63
57

NO.2

This parameter specifies the number (0-63) of the access code being assigned for mutual access. This parameter serves as a counter for the access codes being assigned.

Note: This parameter is used when assigning the details of the service by the ASPS command.

KIND: (0-3)

This parameter specifies the Split Access Parameter Classification. The data to be assigned here depends on how the Guest and Administration stations are differentiated.

The Guest and Administration stations may be assigned to separate TNs, RSCs, and/or SFCs, or they may only be differentiated by their respective designations as Administration or Guest.

0:Administration/Guest

(Assign this if the access code is to be shared between Guest

and Administration with no correspondence to TN, RSC or SFC.)

1:TN

(Assign this if the access code is to be shared among specified TNs)

2:RSC

(Assign this if the access code is to be shared among specified RSCs)

3:SFC

(Assign this if the access code is to be shared among specified SFCs)

For more information about Hotel Service, refer to AASP command.

NDA-24298CHAPTER 4

Page 931

Issue 1