NEC NDA-24298 manual 00 Hex, ROM, Data 2 sec.-ON, Sec.-OFF is, Automatically set

ASYD : Assignment of System Data

	SYSTEM			BIT
SYSTEM		DATA	CORRESPONDING
	DATA
DATA		(DATA)		DATA
	INDEX					SYSTEM DATA CONTENTS
TYPE		00 - FF
(SYS)	(INDEX)	(Hex)	DATA
	0 - 31				BIT
			0/1
						2 Burst (0.4 sec.–ON, 0.2 sec.-OFF, 0.4 sec.–ON) on the ON Time for
					b0	Ringer Pattern 0
						0/1 = Not Required/Required
						2 Burst (0.4 sec.–ON, 0.2 sec.–OFF, 0.4 sec.–ON) on the ON Time
					b1	for Ringer Pattern 1
						0/1 = Not Required/Required
			0		b2
	3		0		b3	Not used
			0		b4
						3 Burst (0.4 sec.–ON, 0.2 sec.–OFF, 0.8 sec.–ON, 0.2 sec.–OFF, 0.4
					b5	sec.-ON) on the ON Time for Ringer Pattern 5
						0/1 = Not Required/Required
			0		b6	Not used
			0		b7	Allow Bit 0 to be reset to 0
						0/1 = No/Yes
3	4	00				Not used
	5	00				Not used
	6	00				Not used
					b0		Timer Value for Ringer
						ON time is to be assigned a value from	used for Call Back, OG
					b1
							Trunk Queuing, Call
						1 Hex to F Hex (1–15). (Unit of Time is
					b2
						Second.)	Waiting, and Auto/Dial
					b3		Intercom (Ringer Pattern
							5).
	7				b4
					b5	OFF time is to be assigned a value from
							Note: When this data is
					b6
						1 Hex to F Hex (1–15). (Unit of Time is	00 Hex, ROM
						Second.)
							data (2 sec.-ON,
					b7
							4 sec.-OFF) is
							automatically set.
	8	00				Not used
	9	00				Not used
	10	00				Not used

CHAPTER 4 NDA-24298

Page 170

Issue 1