NEC NDA-24298 manual Atim Assignment of Date and Time

ATIM : Assignment of Date and Time

ATIM: Assignment of Date and Time

1.General

This command sets the clock information for the system. Clock information is executed when Y is entered in the WRT? field and the Enter key pressed.

2.Precautions

1.The clock is assigned in military time.

2.Clock information assigned in this command is necessary for the following purposes:

(a)To indicate time for Dterm and ATT (Desk Console/Hotel Console)

(b)To specify the time for changing the route pattern for LCR

(c)To specify the time and date for changing the number development for LCR

(d)To specify the time for outgoing calls or for refusing incoming calls

(e)To specify the start time for the routing diagnosis

(f)To specify a length of time for Traffic Measurement

(g)SMDR

3.The system automatically takes the leap year into account.

3.Data Entry Instructions

DAY

Enter the digits with a range from 1 to 31.

YEAR

Enter 4 digits as the year.

(For example:1999 or 2000)

MINUTE

Enter the digits with a range from 1 to 60.

	DATE			TIME
YEAR	MONTH	DAY	HOUR	MINUTE	SECOND

MONTH

Enter the digits with a range from 1 to 12.

HOUR

SECOND

Enter the digits with a range from 1 to 60.

Enter the digits with a range from 1 to 24.

NDA-24298CHAPTER 4

Page 57

Issue 1