NEC NDA-24298 manual Aospn Assignment of Outgoing Selection Pattern for NDM

AOSPN : Assignment of Outgoing Selection Pattern for NDM

AOSPN: Assignment of Outgoing Selection Pattern for NDM

1.General

This command assigns skip and additional digits information for Outgoing Selection Translation Pattern Number (PNO) in Fusion Network. The data assigned by this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN).

2.Precautions

1.Before using this command, make sure that an Outgoing Selection Translation Pattern Number (PNO) has been assigned in the ASTPN command.

2.The transmit number translation of the OGC/OGCA method outgoing calls are done by ASTPN/AOSPN command. Since the additional number and skip digits can be assigned by the AOPRN/AADCN command for LCR/LCRS method, the ASTPN/AOSPN command may not be required.

3.Data Entry Instructions

PNO

Enter the PNO assigned by the ASTPN command.

ADD

Enter the number of digits to be entered in DC parameter. If SKIP=0, ADD must be assigned to 1-4.

OUTGOING SELECTION	NUMBER OF DIGITS NUMBER OF ADDITIONAL		ADDITIONAL DIGIT INFORMATION
TRANSLATION PATTERN NUMBER	SKIPPED	DIGITS	(DC)
(PNO)	(SKIP)	(ADD)
			MAXIMUM 4 DIGITS
1-15	0-24	0-4

SKIP

Enter desired skip digits if required

DC

Enter desired additonal numbers within 4 digits.

NDA-24298CHAPTER 4

Page 293

Issue 1