NEC NDA-24298 manual Acfot Assignment of Call Forwarding Data Telephone Number, Cfi

ACFO_T : Assignment of Call Forwarding Data – Telephone Number

ACFO_T : Assignment of Call Forwarding Data – Telephone Number

1.General

This command is used to assign various call forwarding service data on a tenant basis. The destinations of forwarded calls can be the attendant console, a station, or an outside party. The station data of ACFO command can be assigned by using Telephone Number instead.

2.Precautions

1.Only the Telephone Numbers assigned by the ALGSN command can be used. Telephone Numbers by the ALGSL command is not available in this command.

2.In case logging in to a LN, only the Telephone Numbers allocated to the stations within the logged-in node can be used in this command. Also, when logging in to the NCN, the data memory of the whole nodes in the network is to be written.

3.The parameter ADC is required only when “Night Connection Outside” is selected in “CF” parameter. The Abbreviated Digit Codes (ADC) and the speed dial number are assigned by the ASPD command.

4.The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8.

3.Data Entry Instructions

CF

Select the type of call forwarding service.

•Call Forwarding – Busy Line

•Call Forwarding – Don't Answer

•Call Forwarding – Intercept

•Night Connection Outside

ADC

Enter the ADC to the forwarded station when "CF = Night Connection Outside" is selected.

TENANT	CALL		CALL FORWARDING DESTINATION		ABBREVIATE
	FORWARDING			TELEPHONE NUMBER	DIGIT CODE
NUMBER
	SERVICE				(ADC)
		(CFI)	(UGN)	(TELN)
(TN)
	(CF)				Max. 4 digits
				Max. 16 digits

CFI

ATT: Forwarded to Attendant Console

TELN: Forwarded to Station

TELN

Enter the Telephone Number of destination station to which the call is forwarded. This parameter appears when "TELN" is selected in "CFI" parameter.

NDA-24298CHAPTER 4

Page 793

Issue 1