NEC NDA-24298 manual Business System Command Descriptions and Data Sheets

CHAPTER 4 BUSINESS SYSTEM COMMAND DESCRIPTIONS AND DATA SHEETS

This chapter explains the parameters for the Business System commands of the NEAX2400 IPX. A data sheet is provided for each command. The commands are listed in standard programming order as illustrated in the Data Assignment Flow Chart.

If you know a command name, and you want quick access to the command’s description, you can refer to the Business Command List in Alphanumeric Order to find the page on which the command is described.

The contents of each command description are shown in Figure 4-1. The data sheet is on the page following the command description.

Note 1: Data for the most frequently used parameters are as follows (for the NEAX2400 IPX):

TN = 1-63

STN = Maximum 5 digits

LENS = 6 digits (Module Group, Unit, Group, Level)

MG = 00/01 for 1-IMG System/00-07 for 4-IMG, IPX-U System

RT = 1-255 (maximum number of routes is designated by the ASYD command, INDEX 65.) TK = 1-255

Attendant Consoles = 1-16 for 1-IMG System/1-32 for 4-IMG System/1-60 for IPX-U System

Note 2: It is possible to readout/list-up the existing NDM data without logging in to the NCN (Network Control Node) in Fusion Network. When assigning the NDM data, NCN log-in is required as before.

Note 3: The new commands for concealing physical station number (with “_T” in the command name), have the function to assign the station data by usingTelephone Number instead of Physical Station Number. These new commands execute the data assignment/deletion for the Data Memory (DM) only, as the same as the existing command.

NDA-24298CHAPTER 4

Page 55

Issue 1